PRODUCTS
Online Service
ATS for Solar/Wind System
Category: Others
Publish Time: 2019-05-20 12:47
In places where there is stand-alone solar or wind system, at the same time the utility power or generator power is available, you can use the electricity stored in the battery first, when the solar system shut down due to a low battery voltage, the ATS will automatically transfer the loads to the utility/generator power.
The ATS allows for trouble-free operation of inverters and AC mains in the same circuit. It switches automatically between inverter and AC mains while protecting the inverter against external voltage. It switches to grid when battery voltage is down to Cut-down Voltage, once the battery voltage is back to Recovery Voltage, it will switch back to battery power.
Please note: the ATS is only used to switch between the power sources of battery bank and AC utility or generator. However, the ATS can not start up the generator, it can work with generator only when the generator is running. when battery voltage is high, it will use battery to power loads, circuit from battery to loads is on inside this ATS, and circuit from geneator to loads is off inside the ATS; when battery voltage is low, it will use generator to power loads, circuit from battery to loads is off inside this ATS, circuit from geneator to loads is on inside the ATS.